Types of Woodworking Clamps
Clamps are extremely useful (and even necessary) while doing certain jobs.
Among the different hand-screw, bar, spring, strap, pipe, and C-clamp options, which one is best for the job? Here are seven most common types of woodworking clamps.
Clothespins act similarly to spring clamps, but with more force and stability.
They are available in a variety of sizes, which are determined by the width of the entrance.
They may be used in a variety of situations, not just in the shop, but also in the home.
Because they’re some of the most affordable clamps on the market, you can stock up on a variety of sizes.
A bar clamp is similar to a pipe clamp in structure, but it has a ratcheting handle that progressively brings the jaws together, allowing it to be used with with one hand.
The clamp may also be removed quickly thanks to the fast release feature on the handle. Next in our article Types of Woodworking Clamps is:
For edge gluing wood together in cabinet or furniture building, a pipe clamp is commonly employed.
By simply adjusting the length of pipe between the fittings, it can be built to any size.
Because the pressure applied by a pipe clamp might damage wood, it’s a good idea to use blocks, cardboard, or felt to protect the wood being clamped.
Types of Woodworking Clamps: Ratcheting Band Clamps
When several surfaces, particularly those that aren’t parallel, need to be fastened together or clamping pressure has to originate from multiple directions, a band clamp is a good solution.
A mitered frame or box can be clamped using special band clamps through which corner blocks can be threaded.
For circular parts, the band clamp is also useful.
To hold a piece of work fixed while it’s being machined, a toggle clamp can be mounted to a work surface or a jig.
Toggle clamps are available in a variety of sizes and styles, including push, pull, and right-angle, all of which are adapted to specific situations.
By pressing down on the handle, an adjustment screw is forced onto the work, immobilizing it. Next in our article Types of Woodworking Clamps is:
Types of Woodworking Clamps: Handscrew Clamps
Two hardwood jaws and two handles with long threaded screws make up a handscrew clamp.
The best thing about this clamp is that it can be modified to fit a variety of strange shapes and angles.
It uniformly distributes pressure throughout the hardwood jaws, reducing the risk of damaging or marring the wood it’s gripping.
Corner clamps keep your components in place as you work, allowing you to build corners or T-joints.
For purposes like picture frames, smaller sizes are employed, whereas larger sizes are used for things like bookcases.
They don’t use force, thus two pieces of wood aren’t actually pushed against each other.
Rather, they act as a frame for your parts, holding them in place as you glue and screw them together.