"We plan. We craft. We conquer."

Although you can get a wide variety of vises, we will focus on the different types of woodworking vises. So, we start…

Woodworking vise: A woodworking vise is a powerful tool for clamping large pieces of wood. This type of vise is commonly used by professional woodworkers and production units. Different types of joinery corsets are used. A woodworking vise is usually attached to the lower part of the workbench. This allows the jaws of the vise to be flush with the surface of the workbench. There are three categories of Types Of Woodworking Vises:

Types Of Woodworking Vises #1 Vise with dogs

Types of Woodworking Vises

These are usually made of cast iron and are precision machined for a high degree of accuracy. They have a sliding motion and move along a threaded steel main screw.

Quick-release presses

Woodworking Vises

A quick-release corset does exactly what its name implies. It can be quickly released by opening the split nut when the work is finished. Now the jaws are released with a single twist of the lever, rather than several turns as is necessary with most other types of clamps. This is why this type of hinge is often used in large-scale production jobs with repetitive processes. The quick-release action of the split nut greatly increases the speed of operation.

Types Of Woodworking Vises #3 Vise Woodcraft

Unlike woodworking vises, which are usually heavier, the woodcraft vise is relatively lighter, making it easier to handle and carry. We typically use a Woodcraft vise for clamping smaller wooden objects. Although hobbyists and craftsmen usually have a preference for this type of beast, it is a tool that can also be seen in many professional woodworking workshops. Other Types Of Woodworking Vises:

The woodworking vise is also used in the repair of various wooden household items where glued joints need to be pressed together.

Vise for pattern makers

Types of Woodcraft Vises 3

A sample vise is a precision tool used for a variety of purposes in the woodworking industry. This vise can rotate, tilt and pivot, making it a versatile tool for clamping a workpiece in any position. There are not many variations of the modelling vise, but it is an indispensable tool for the woodworker involved in a wide variety of woodworking processes. Other Types Of Woodworking Vises:

Vise for workbenches

This is the tool that adorns every woodworker’s workbench. However, this model is more common in the USA than in the UK. The difference between this hinge and other types of hinge is that it is not attached to another place, but is an integral part of the workbench. The jaws and handle are permanently fixed to the workbench and are not dismantled. Again, there are three types of visors for workbenches:

Types Of Woodworking Vises # 6 Workbench leg visors

Types of Woodcraft Vises

As the name of each category of workbench vise suggests, they are confined to a specific place on the workbench. So you will find a front vise at the front of the workbench, a foot vise at the leg and a tail vise at the end of the workbench. Other Types Of Woodworking Vises:

Engineering Corset

Types of Woodcraft Vises 8

No discussion of bricklaying would be complete without mentioning engineering or mechanical engineering bricklaying. In fact, it is one of the most widely used vises.

When we hear the word “vise”, it is this type of vise that comes to mind. However, we do not attach this self-contained grip to the workbench in the same way as we attach woodworking vises.

An engineering vise is usually made of cast iron and has to be screwed to a fixed surface. Because it is as heavy as an anvil, it actually doubles in weight due to the heavy, hard and flat surfaces on the screw, which can be struck with a hammer. The engineering vise can be used mainly for gripping objects when you want to work them.

However, hard jaws can damage the wood you are working on. If you need to hold a piece of wood between the jaws of an engineer’s vise, you can buy jaw liners or make your own by adding wooden blocks.

Nevertheless, you will find that an engineer’s vise is a very important part of any woodworking workshop. For example, if you need to machine metal objects that are used on wood, you can machine them in an engineering vise. The engineering vise also has a rotating action.